Microhard Systems VIP4G Manual de instalación descargar pdf (Pagina 26)

4.0 Configuration

4.0 Web User Interface

Initial configuration of an VIP4G using the Web User (Browser) Interface (Web UI) method

involves the following steps:

 configure a static IP Address on your PC to 192.168.168.10 (or any address on the

192.168.168.X subnet other than the default IP of 192.168.168.1)

 connect a VIP4G LAN ETHERNET port to PC NIC card using an Ethernet cable

 apply power to the VIP4G and wait approximately 60 seconds for the system to load

 open a web browser and enter the factory default IP address of the unit: 192.168.168.1

 logon window appears; log on using default Username: admin Password: admin

 use the web browser based user interface to configure the VIP4G as required.

 refer to Section 2.0: Quick Start for step by step instructions.

In this section, all aspects of the Web Browser Interface, presented menus, and available

configuration options will be discussed.

Image 6-1: WebUI

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 111 112

Sin comentarios

Microhard Systems VIP4G Manual de instalación Pagina 26